• Categories:Hairun News
• Author:
• Origin:
• Time of issue:2021-10-21
• Views:

(Summary description)The electroplated ceramic cylinder is an upgraded product of the traditional cylinder of the engine system. Some functions of the original cylinder have been improved through the electroplated ceramic process. Although ceramics have good stability and excellent heat insulation performance, it is difficult to maintain performance if the cylinder is used for a long time without maintenance. So how should the cylinder be maintained? Today, the editor brings you a few points for attention when maintaining the cylinder!
　　
For pneumatic components, the air tightness of the equipment and the lubrication requirements of the oil mist lubrication components are the two most important points in the maintenance. Then we should pay attention to the fact that the oil mist device is best to choose a specification that is supplemented once a week. When oiling, pay attention to the reduction of oil volume. If the fuel consumption is too low, you should readjust the amount of oil dripping. After the adjustment, the amount of dripping oil still decreases or does not drip. Check whether the inlet and outlet of the lubricator are reversed, whether the oil passage is blocked, and whether the specifications of the selected lubricator Suitable.
　　
Carefully check all leaking parts, tighten loose screws and pipe joints, check the quality of the reversing valve exhaust gas on the terminal block, check whether the adjustment parts are flexible, check whether the indicating instrument is correct, check the reliability of the solenoid valve switching action, Check the quality of the cylinder piston rod and everything that can be checked outside. The correct way to maintain and maintain the cylinder:
　　
　　1. When overhauling and reassembling the cylinder, the parts must be cleaned, especially to prevent the sealing ring from being cut and damaged, and pay attention to the change of the sealing ring installation direction.
　　
　　2. During use, check whether there is any abnormality in each part of the cylinder, whether there is any looseness in the connection, etc., and the movable part of the cylinder with shaft pin installation should be regularly refueled.
　　
　　3. When the cylinder is removed and not used for a long time, all treatment surfaces should be coated with anti-rust oil, and dust-proof protection should be added to the intake and exhaust ports.
　　
　　4. When the cylinder is repaired and reassembled, the parts must be cleaned, and dirt must not be brought into the cylinder. In particular, it is necessary to prevent the sealing ring from being cut and damaged, and pay attention to the installation direction of the dynamic sealing ring.
　　
　　 5. To formulate the monthly, quarterly, and annual maintenance system of the cylinder, please refer to the content specified in the directional valve maintenance management system. The maintenance generally uses grease, commonly known as butter, but also depends on the temperature of the piston. The grease forms a thin film inside the piston, which can make the piston better sealed.
　　
　　 The above is the knowledge point of how to maintain the cylinder, everyone remember it! If you want to know more about electroplated ceramic cylinders, you can pay more attention to our website! If you want to buy electroplated ceramic cylinders, gearbox heads, lawn mowers, connecting disks, etc., you can contact us directly to consult and order!